We were able to renew our ISO9001:2015 quality management certification and ISO45001:2018 occupational health and safety management certification again after a successful monitoring audit.
Pictured here is our QM representative Sophie Schmiemann with the current certificates.
We are pleased to announce the beginning of a series of exciting developments for L+R's presence in North America: Effective immediately, we have established distribution partnerships with two companies in the USA and Canada: Test Equipment Distributors (TED) in the USA and Trikon in Canada.
We are looking forward to a successful cooperation!more Information
At L+R we invest for our customers:
Whether for our customers in mechanical engineering, in the automotive industry or in aerospace technology - everywhere where not only time and money but also precision are crucial production factors, Laubinger + Rickmann GmbH & Co. KG provides an optimal manufacturing solution with the highest quality standards.
By investing in a modern 5-axis simultaneous milling machine with pallet changer and its programming via a CAD-CAM system, we can meet the increased market demands for high-quality machines with short delivery times even better.
The machine of type DMU 60 eVo linear allows impressive traversing speeds of all linear axes of up to 80 m/min due to the integrated dynamic package. The integrated pallet changer and other accessories enable parallel set-up and unmanned 5-axis simultaneous machining of up to eight different workpieces.
The team of the machining department is looking forward to the new challenges!
Following our slogan - Technology for Quality - we have once again successfully obtained re-certification as a specialist welding company according to DIN EN 1090 and DIN EN ISO 3834.
Our responsible welding supervisor David Iker and quality management representative Sophie Schmiemann are pleased that we can continue to provide individual solutions of the highest quality to our customers.
On September 29, our team member Philipp Hettich was accepted into the Automotive Technical Committee of the DGZfP. We are looking forward to a productive and trustful cooperation with the experts from the automotive world in order to provide our customers with an even broader spectrum of expertise!Learn more
The current situation around COVID-19 poses great challenges for the whole world. For us at L+R, health and safety are of course the top priority in this situation. We consistently implement the recommended protective measures such as home office, shift work and social distancing to prevent the spread of the virus and at the same time be there for you as usual.
Our business operations continue, and you can reach our employees through the usual channels.
During the last weeks we have been able to welcome a number of new employees in different departments at L+R: Jürgen Erhardt, Benedikt Feldhues and André Sestendrup (from left to right).
Welcome to our team!
Since January 2020 L+R is a member of the German Society for Non-Destructive Testing (DGZfP e.V.) in Group B "Manufacturers and Suppliers of Testing Equipment and Accessories", as Dr. Matthias Purschke, Managing Director of the DGZfP, announced in a letter to our Managing Director Thomas Thiemann.
We look forward to actively shaping the future of non-destructive testing!
Because as it is so fittingly written on the DGZfP website:
"Today, no gas or oil supply, no take-off of an airplane, no production of a car or a train, no bridge construction and no operation of a power plant is conceivable without constant control by means of non-destructive testing. Every safety-relevant part is tested!"
About the DGZfP e.V:
The Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. (German Society for Non-Destructive Testing) is a technical and scientific association with more than 1,600 corporate and personal members, which is recognized both in Germany and abroad.
Its aim is the research, development, application and promotion of non-destructive testing methods.
We welcome Philipp Hettich to our team as head of sales, testing and process consulting at Laubinger + Rickmann!
After completing his diploma thesis in the field of textile testing for TÜV SÜD in Mumbai, Philipp arrived in non-destructive testing (NDT) in 2014 via detours on the development side. As head of several sites for our clients, he has gained a lot of experience with non-destructive testing equipment for various technologies and knows what is important to our clients, end customers and auditors. As a certified inspector (level 2 according to ISO 9712 in PT and RT-S) he knows the challenges of everyday inspection. As a specialist for standardization in penetrant testing and as a consultant he has already designed processes (and therefore requirements for NDT systems) worldwide or has analyzed test processes / test systems for automobile manufacturers, released them or developed solutions for testing.
It is our common goal that L+R in the field of NDT will be able not only to offer mere systems but a functioning testing process, thus clearly distinguishing L+R from the competition and further enhancing our reputation as experts in the "Technology for Quality".
In his private life Philipp is at home in Frankfurt and likes to be seen on his motorbike - be it on the road or even better off the road. If he can't go any further by land, he prefers to get on a sailboat and sail around Greek islands.
We wish Philipp all the best for the start and much success in the exciting special machine industry!
On 10 October, the NDT Roadshow on non-destructive testing took place at the Motorworld in Böblingen, the Mecca of the automotive industry. Here, visitors were offered numerous expert lectures and the opportunity to talk directly to the manufacturers at the exhibition booths.
Laubinger + Rickmann used this opportunity to present the latest generation of crack detection systems to the participants. The new concepts are tailored to the customer's requirements and thus set standards in the fields of economy and ergonomics - factors that are more important than ever in today's industrial environment.
In interesting and fruitful discussions with other industry members, ideas and impulses could also be exchanged in order to continue to focus non-destructive testing on the future.learn more
L+R is now officially certified as one of the first companies in Germany in occupational health and safety management according to ISO 45001:2018.
The picture shows our management representative Sophie Schmiemann with the current certificates.
In August 2019 our new apprentices Marcel Fißmann, Julian Czech and Tim Grummel have started their education as Precision Engineering Technicians and as Electronics Technicians for Automation Technology at L+R. Welcome to out team!
In July 2019, our mechanic apprentice Niklas Schräder completed his training as one of the best examiners of this year and was awarded by the Steinfurt-Warendorf District Trade Association. Congratulations!read more
In June 2019, our apprentices Estelle Schräder and Tom Schlieckmann completed their training as mechatronics engineers at L+R with success and good results.
On 01 May 2019 we were pleased to welcome the following new colleagues to our L+R team:
Welcome and a successful start at L+R!
In January 2018 L+R successfully completed the recertification of the quality management system according to the latest standard EN ISO9001:2015.
The occupational health and safety management system was also transferred to the new standard ISO45001:2018.
On September 1, L+R hosted a Family Day for the relatives and friends of our employees.read more
In August 2018, our apprentice Peter Averbeck graduated as a precision engineering mechanic as one of the 19 best candidates in the district of Steinfurt.read more
In June 2018, L+R successfully recertified ist welding certification according to DIN EN 1090 and DIN EN ISO3834-2.
In January 2018, L+R successfully recertified the quality management system according to the latest standard EN ISO9001:2015.
Likewise, the occupational safety management system according to OSHA18001:2017 has been brought up to date.
In the recent weeks, we were able to welcome a number of new employees at L+R. Welcome to our team!
(left to right)
Our new colleague in mechanical engineering department, Mr. Marvin Kemper, at the FH Münster under Prof. Baalmann in collaboration with L + R has completed his bachelor thesis and achievend the grade 1.0. Congratulations!
Left: Tobias Schürmann (supervisor of the work at L + R),Right: Marvin Kemper
On 1 August 2017 our long-term employee Mr. Wobbe has celebrated his 40-year-old company affiliation. Congratulations!